MAINTENANCE AND SERVICE
The wiper blades will also move out of the
service position if:
Using the windshield wipers (p. 176)
Wiper blades and washer fluid (p. 176)
•
•
Filling washer fluid
Washer fluid is used to keep the headlights,
windshield and rear window clean. Washer
fluid containing anti-freeze should be used in
very cold weather (below-freezing tempera-
tures).
The windshield wipers are turned on.
The windshield washers are turned on.
The rain sensor is activated.
•
•
•
•
The vehicle begins moving.
If the wiper arms in service position are
raised from the windshield, they must be
folded back against the windscreen before
activating wiping, washing or rain sensor
as well as before departure. This is to pre-
vent scratching the paint on the hood.
Related information
Using the rain sensor (p. 177)
•
Fill washer fluid into the reservoir with the
blue cover. The reservoir is used for the wind-
shield washer, tailgate window washer and
headlight washer*
Using the windshield and headlight wash-
ers (p. 179)
•
Using automatic rear window wiping
when backing up (p. 181)
•
•
•
Using the rain sensor's memory function
(p. 178)
When there is approximately 1 liter (1 qt) of
washer fluid remaining, the message
Washer fluid Level low, refill and the
Using the rear window wiper/washer
(p. 180)
•
•
symbol will be displayed in the
instrument panel.
Replacing windshield wiper blades
(p. 625)
Changing rear window wipers (p. 624)
•
}}
* Option/accessory. 627
