Starting and driving -> Shiftlock for Your Volvo XC60 SUV 2020

STARTING AND DRIVING  
Shiftlock  
Automatic shiftlock  
The automatic shiftlock has a separate safety  
system.  
Related information  
Automatic transmission (p. 396)  
The automatic transmission's shiftlock func-  
tion helps prevent inadvertently moving the  
gear selector between different positions.  
There are two types of shiftlocks: mechanical  
and automatic.  
Gear selector positions for automatic  
transmissions (p. 397)  
From Park - P  
To move the gear selector from P to another  
gear, the brake pedal must be depressed and  
the ignition in mode II. For vehicles with the  
small gear selector, the engine must be run-  
ning.  
Mechanical shiftlock  
From Neutral - N  
If the gear selector is in N and the vehicle has  
been stationary for at least 3 seconds (with or  
without the engine running), the gear selector  
will be locked in that position.  
To move the gear selector from N to another  
gear, the brake pedal must be depressed and  
the ignition in mode II. For vehicles with the  
small gear selector, the engine must be run-  
ning.  
Shiftlock for vehicles with large gear selectors.  
Messages in the instrument panel  
If the gear selector is locked in position, a  
message will appear in the instrument panel,  
e.g. Gear lever Press brake pedal to  
activate gear lever.  
The gear selector can be moved back and  
forth between N and D. The other positions  
have a shiftlock that is operated using the lock  
button on the gear selector.  
Press and hold the shiftlock button and move  
the gear selector forward or backward  
between P, R, N and D.  
There is no mechanical shiftlock function.6  
6
Applies for vehicles with the small gear selector  
401  
 
STARTING AND DRIVING  
Press a small screwdriver or similar object  
into the hole and hold it down.  
Deactivating the automatic  
shiftlock7  
The kickdown function  
Kickdown can be used when maximum  
acceleration is needed, e.g. when passing.  
When the accelerator pedal is depressed all  
the way to the floor (past the normal full accel-  
erator position), the transmission will auto-  
matically engage kickdown, i.e. immediately  
shift down to a lower gear.  
If the vehicle does not have electrical current,  
the automatic shiftlock may be disengaged  
on vehicles equipped with the large gear  
selector. The shiftlock cannot be disengaged  
on vehicles equipped with the small gear  
selector.  
Move the gear selector to N and release  
the button.  
4. Replace the rubber mat.  
If the accelerator pedal is released from the  
kickdown position, the transmission will auto-  
matically shift up again.  
Safety function  
The transmission control module is equipped  
with a downshift protection feature to help  
prevent the engine from overheating.  
In some conditions, the transmission will pre-  
vent downshifting/kickdown if this would lead  
to such high engine speed (rpm) that the  
engine could be damaged. If the driver still  
attempts downshifting or kickdown at a high  
rpm, nothing will happen and the original gear  
will remain selected.  
Overview of small gear selector, where it is not pos-  
sible to deactivate the shiftlock.  
Large gear selector overview.  
Related information  
If the vehicle cannot be driven (e.g. due to a  
discharged battery), the gear selector must be  
moved to the N position so that the vehicle  
can be moved.  
Automatic transmission (p. 396)  
With kickdown, the vehicle can downshift one  
or more steps at a time depending on the  
engine speed. The vehicle upshifts when the  
engine reaches its maximum rpm to prevent  
engine damage.  
Lift the rubber mat in the storage com-  
partment in front of the gear selector.  
Locate the hole with a spring-loaded but-  
ton in the bottom of the compartment.  
Related information  
Automatic transmission (p. 396)  
7
The function is not available for vehicles with the small gear selector.  
402  
 
STARTING AND DRIVING  
once the vehicle is started, e.g. to Individual  
mode. Once Individual mode is selected, you  
can adjust settings to personal preferences,  
e.g. to show the tachometer.  
All Wheel Drive (AWD)*  
Drive modes*  
All-wheel drive (AWD8), also called four-  
wheel drive, means that power is distributed  
to all four wheels, which improves traction.  
To achieve the best traction, power is auto-  
matically directed to the wheels that have the  
best grip. The system continuously calculates  
the need for torque to the rear wheels, and  
can immediately redistribute up to half of the  
engine's torque to the rear wheels.  
Drive modes affect the vehicle's driving cha-  
racteristics in different ways to enhance and  
simplify the driving experience in certain  
types of situations.  
Drive modes enable easy access to the vehi-  
cle's many functions and settings in different  
driving situations. The following systems are  
adapted to help optimize driving characteris-  
tics in each drive mode:  
Comfort  
Comfort is the vehicle's default mode. This  
setting offers driving comfort, light steering  
and soft suspension.  
In Comfort mode, no tachometer will be dis-  
played in the instrument panel9.  
Steering  
All-wheel drive also has a stabilizing effect at  
higher speeds. In normal driving conditions,  
most of the engine's power is directed to the  
front wheels. When the vehicle is stationary,  
all-wheel drive is always activated in prepara-  
tion for maximum traction during acceleration.  
Eco  
Engine/transmission/all-wheel drive*  
Adapt the vehicle for more fuel-efficient  
Brakes  
and eco-friendly driving with Eco mode.  
Pneumatic suspension* and shock absorb-  
In this mode, the Start/Stop function is acti-  
vated, the ground clearance is lower to reduce  
air resistance and certain climate settings are  
reduced.  
ers  
Instrument panel  
All-wheel drive reacts differently depending on  
which drive mode is selected.  
Start/Stop function  
Climate control settings  
When driving in Eco mode, an ECO gauge  
indicating how economical the driving is will  
be displayed in the instrument panel.  
Related information  
Low Speed Control* (p. 416)  
Transmission (p. 395)  
Select the drive mode that is adapted to the  
current driving conditions. Keep in mind that  
not all drive modes are available in all situa-  
tions.  
Available drive modes  
When the engine is started, the vehicle will be  
in Comfort mode and the start/stop function  
will be activated. Drive mode can be changed  
8
All Wheel Drive  
Only applies to vehicles with 8-inch instrument panels.  
9
}}  
* Option/accessory. 403