DISPLAYS AND VOICE CONTROL
|| response is still not given, voice control will be
Commands for specific functions, such as
phone and audio, are described in the sections
related to that function.
With repeat mode on, the system will repeat
what you have said.
automatically canceled.
To speed up communication and skip prompts
from the system, press the voice control but-
To change the speech rate or activate/deacti-
vate repeat mode:
Numbers
Number commands can be given in different
ways depending on the function to be con-
trolled:
ton
on the steering wheel keypad. This
1.
Tap Settings in the Top view.
will interrupt the system's response and you
can say the next command.
2. Tap System Voice Control and select
settings.
Phone numbers and zip codes should be
given by stating each number individually,
e.g. "zero, three, one, two, two, four, four,
three" (03122443).
•
Voice command examples
Repeat Voice Command
Speech Rate
•
•
Tap
.
1.
2.
Say "Call [First name] [Last name]
[number category]", e.g. "Call Robyn
Smith cellular".
Related information
Addresses can be given by stating each
number individually or in a group, e.g.
"two, two" or "twenty-two" (22). For Eng-
lish and Dutch language settings, groups
of numbers can also be said in sequence,
e.g. "twenty-two, twenty-two" (22 22).
For English, double or triple digits can also
be used, e.g. "double zero" (00). Numbers
in the range 0-2300 can be used.
•
•
•
•
•
> The system will call the selected con-
tact from the phone book. If the contact
has several phone numbers (e.g. home,
cell, work), the right category must also
be given.
Climate control system voice commands
(p. 208)
•
Commands/phrases
The following commands can usually be used
in any situation:
Frequencies can be given as "ninety-eight
point eight" (98.8), "one hundred four
point two" or "hundred and four point
two" (104.2).
•
"Repeat" - repeats the most recent voice
command in the current dialog.
•
"Cancel" - cancels the dialog.20
Speech rate and repeat mode
The speed at which the system speaks can be
adjusted.
•
"Help" - initiates a help dialog. The sys-
tem responds with commands that can be
used in the current situation, an instruc-
tion or an example.
•
20
Note that this only cancels the dialog when the system is not speaking. To do this, press and hold
until you hear two beeps.
148
