Seats and steering wheel -> Front seat massagesettings for Your Volvo Xc90 SUV 2020

SEATS AND STEERING WHEEL  
||  
Adjusting the power* front seats (p. 187)  
Front door closed  
Front seat massage* settings  
Press and hold one of the memory buttons  
(1-3) until the seat, door mirrors and head-  
up display stop in the positions stored in  
that memory button.  
The settings for the multifunctional seats can  
be adjusted using either the mutifunction  
control on the side of the seat or the center  
display. The adjustment settings are shown in  
the center display.  
Storing positions for seats, mirrors and  
head-up display* (p. 188)  
If the memory button is released, the seat,  
door mirrors and head-up display will stop  
moving.  
WARNING  
This list point needs to be translated  
exactly to: "Because the driver's seat  
can be adjusted with the ignition off,  
children should never be left unatten-  
ded in the vehicle.  
Movement of the seat can be STOP-  
PED at any time by pressing any but-  
ton on the power seat control panel.  
Adjusting the door mirrors (p. 173)  
Head-up display settings* (p. 145)  
Multifunction control, located on the side of the seat  
cushion.  
Do not adjust the seat while driving.  
Massage settings  
The following massage settings are available:  
The seat should be adjusted so that the  
brake pedal can be depressed fully. In  
addition, position the seat as far rear-  
ward as comfort and control allow.  
On/Off: Select On/Off to turn on/off the  
massage function.  
The seat rails on the floor must not be  
obstructed in any way when the seat is  
in motion.  
Programs 1-5: There are 5 preset mas-  
sage programs. Select Swell, Tread,  
Advanced, Lumbar or Shoulder.  
Intensity: Select Low, Normal or High.  
Speed: Select Slow, Normal or Fast.  
Related information  
Manual front seats (p. 186)  
Power* front seats (p. 187)  
190  
* Option/accessory.  
 
SEATS AND STEERING WHEEL  
2.  
Select Massage in the seat settings view.  
Restarting the massage function  
The massage function turns off automatically  
after 20 minutes. The function is reactivated  
manually.  
Adjusting front seat massage  
settings*  
3. Select massage settings by tapping the  
center display or by moving the cursor up/  
down using the multifunction control's  
The settings for the multifunctional seats can  
be adjusted using either the mutifunction  
control on the seat or the center display. The  
adjustment settings are shown in the center  
display.  
Tap Restart, which is displayed in the  
center display, to restart the selected mas-  
sage program.  
upper /lower  
buttons. Change a set-  
ting in the selected function by tapping  
the arrows on the center display or by  
> The massage program will restart. If no  
selection is made, the message will be  
stored in Top view.  
using the multifunction control's front  
/
Adjusting front seat massage settings  
The front seat backrests have a massage func-  
tion. Air-filled cushions provide the massaging  
action and a number of settings are available.  
rear  
buttons.  
Related information  
Related information  
Manual front seats (p. 186)  
The massage function can only be activated  
when the engine is running.  
Manual front seats (p. 186)  
Power* front seats (p. 187)  
Power* front seats (p. 187)  
Adjusting the power* front seats (p. 187)  
Adjusting the power* front seats (p. 187)  
Storing positions for seats, mirrors and  
head-up display* (p. 188)  
Storing positions for seats, mirrors and  
head-up display* (p. 188)  
Using stored positions for seats, mirrors  
and head-up display* (p. 189)  
Using stored positions for seats, mirrors  
and head-up display* (p. 189)  
1. Activate the multifunction control by turn-  
ing the control  
upward/downward. The  
seat settings view will appear in the center  
display.  
* Option/accessory. 191  
 
SEATS AND STEERING WHEEL  
2.  
Select Cushion extension in the seat set-  
tings view.  
Adjusting* front seat cushion  
length  
Related information  
Manual front seats (p. 186)  
Depending on the selected equipment level,  
the length of the seat cushion can either be  
adjusted using the multifunction control* on  
the side of the seat cushion, or manually  
adjusted using the control on the front of the  
seat cushion.  
Power* front seats (p. 187)  
Push in the front part of the four-way  
button  
Press the rear part of the four-way but-  
ton to shorten the seat cushion.  
to extend the seat cushion.  
Adjusting the power* front seats (p. 187)  
Storing positions for seats, mirrors and  
head-up display* (p. 188)  
Using stored positions for seats, mirrors  
and head-up display* (p. 189)  
Manually adjusting seat cushion  
length  
Adjusting seat cushion length using  
the multifunction control  
Control for adjusting seat cushion.  
The multifunction control, located on the side of the  
seat cushion.  
Grasp the  
handle on the front of the  
1.  
seat and pull upward.  
1. Activate the multifunction control by turn-  
2. Adjust the length of the seat cushion.  
ing the control  
upward/downward. The  
seat settings view will appear in the center  
display.  
3. Release the handle and make sure the  
seat cushion locks into position.  
192  
* Option/accessory.  
 
SEATS AND STEERING WHEEL  
2.  
Select Side bolsters in the seat settings  
view.  
Adjusting front seat side bolster  
settings*  
Adjusting front seat lumbar  
support*  
Enhance comfort in the front seat by adjust-  
ing the sides of the backrest.  
Use the control on the side of the seat cush-  
ion to adjust the lumbar support.  
Press the front part of the four-way but-  
ton to increase side bolster support  
Press the rear part of the four-way but-  
ton to decrease side bolster support  
.
.
Related information  
Manual front seats (p. 186)  
Power* front seats (p. 187)  
Adjusting the power* front seats (p. 187)  
Storing positions for seats, mirrors and  
head-up display* (p. 188)  
Using stored positions for seats, mirrors  
and head-up display* (p. 189)  
Multifunction control, located on the side of the seat  
cushion.  
Multifunction control, in vehicles with four-way lum-  
bar support*.  
The side bolsters in the front seat backrests  
can be inflated/deflated to adjust the amount  
of support provided. The settings for the multi-  
functional seats can be adjusted using either  
the mutifunction control on the seat or the  
center display. The adjustment settings are  
shown in the center display.  
To adjust the side bolsters:  
1. Activate the multifunction control by turn-  
ing it upward/downward . The seat set-  
tings view will appear in the center dis-  
play.  
Control in vehicles with two-way lumbar support*.  
}}  
* Option/accessory. 193  
 
SEATS AND STEERING WHEEL  
|| Lumbar support is adjusted using the multi-  
function control in vehicles with four-way lum-  
bar support*, or the round button in vehicles  
with two-way lumbar support*. The control is  
located on the side of the seat cushion.  
Depending on the selected equipment level,  
the lumbar support can be adjusted forward/  
rearward and up/down (four-way lumbar sup-  
port) or forward/backward (two-way lumbar  
support).  
Select Lumbar in the seat settings view.  
Related information  
2.  
Manual front seats (p. 186)  
Press the round button up /down  
to move the lumbar support upward/  
downward.  
Power* front seats (p. 187)  
Adjusting the power* front seats (p. 187)  
Storing positions for seats, mirrors and  
Press the front part  
increase lumbar support.  
of the button to  
head-up display* (p. 188)  
Using stored positions for seats, mirrors  
and head-up display* (p. 189)  
Press the rear part  
of the button to  
decrease lumbar support.  
Adjusting lumbar support in vehicles  
with two-way lumbar support  
Adjusting lumbar support in vehicles  
with four-way lumbar support  
Press the front part  
to increase lumbar support.  
of the round button  
1.  
1. Activate the multifunction control by turn-  
ing the control  
upward/downward. The  
seat settings view will appear in the center  
display.  
Press the rear part  
to decrease lumbar support.  
of the round button  
2.  
194  
* Option/accessory.  
SEATS AND STEERING WHEEL  
Adjusting the passenger seat from  
the driver's seat*  
The front passenger seat can be adjusted  
from the driver's seat.  
Activating the function  
The function is activated via the function view  
in the center display:  
Tap the Adjust Passenger  
Seat button to activate.  
Move the passenger seat forward/rear-  
ward by moving the control forward/rear-  
ward.  
Adjust passenger seat  
Change the backrest tilt of the passenger  
seat by moving the control forward/back-  
ward.  
The driver must adjust the passenger seat  
within 10 seconds of activating the function. If  
no adjustment is made within this time, the  
function will be deactivated.  
Related information  
Manual front seats (p. 186)  
The driver adjusts the passenger seat using  
the controls on the driver's seat:  
Power* front seats (p. 187)  
Adjusting the power* front seats (p. 187)  
Storing positions for seats, mirrors and  
head-up display* (p. 188)  
Using stored positions for seats, mirrors  
and head-up display* (p. 189)  
* Option/accessory. 195