Do it yourself -> Vehicle tool kit for Your Volkswagen Golf 4 Door 2023

— Lift the luggage compartment floor and secure it  
in the stops on either side of the luggage com-  
partment → fig. 151 (small arrows).  
Do it yourself  
Vehicle tool kit  
Introduction  
— On some models, it may be necessary to remove  
the compact spare wheel to access the vehicle  
compact spare wheel → page 281, Spare wheel or  
compact spare wheel.  
When securing the vehicle after a breakdown, al-  
ways obey all applicable legal requirements.  
NOTICE  
WARNING  
Always guide the luggage compartment floor back  
down carefully. Dropping the luggage compartment  
floor could damage the vehicle trim and the luggage  
compartment floor panel itself.  
Loose tools and other items in the vehicle tool kit  
and a loose spare (or compact spare) wheel may be  
thrown through the passenger compartment if you  
brake suddenly or steer sharply or are involved in  
an accident. This can cause severe injuries.  
Completely retract the jack after use. Other-  
wise it will not fit in its compartment and can-  
not be stowed safely.  
Always make sure the vehicle tool kit and spare  
(or compact spare) wheel are securely stowed in  
the luggage compartment.  
·
Contents  
WARNING  
Improper or damaged vehicle tools can lead to ac-  
cidents and injury.  
Please read the introductory information and  
heed the Warnings and Notice  
on page 227.  
Never work with tools that are damaged or not  
·
right for the job.  
Storage  
Please read the introductory information and  
heed the Warnings and Notice  
on page 227.  
Fig. 152 Contents of the vehicle tool kit.  
The contents of the vehicle tool kit depend on the  
vehicle's equipment. The following describes the  
maximum contents.  
Contents of the vehicle tool kit fig. 152  
1
Screwdriver with a hexagonal socket in the han-  
dle for removing or inserting previously loos-  
versible. The screwdriver may be stored under  
the lug wrench (if equipped).  
Fig. 151 In the luggage compartment: Luggage com-  
partment floor raised and secured.  
The vehicle tool kit and the spare wheel, compact  
spare wheel, or tire mobility set may be in one of  
several places under the variable luggage compart-  
ment floor in the luggage compartment.  
2
Adapter for anti-theft wheel bolts (if equipped).  
Volkswagen recommends that you always carry  
the adapter for the wheel bolts in the vehicle  
along with the vehicle tool kit. The code number  
— If necessary, detach the luggage net.  
Vehicle tool kit  
227  
     
Lifting the wiper blades and tilting them away from  
the windshield  
of the wheel bolt lock is imprinted on the front  
of the adapter. If lost, a replacement adapter  
can be ordered using this number. Record the  
code number of the wheel bolt lock and store it  
separately from the vehicle.  
— Put the wiper arms in service position →  
.
— Do not handle the wiper blades, handle the wiper  
arms only at the attachment above the wiper  
blades.  
3
4
Screw-in towing eye.  
Hubcap puller clip for removing hubcaps, full  
wheel covers, or wheel bolt caps.  
— Lift the wiper arms away from the windshield.  
Carefully fold the wiper arms back onto the wind-  
shield before driving! Switch the ignition on and  
press the windshield wiper lever down briefly. The  
wiper arms move back to their original position.  
5
Jack (if equipped). Before putting the jack back  
in the foam insert, be sure to completely crank  
the jack down to its original position.  
6
7
Lug wrench (if equipped).  
Crank (if equipped).  
NOTICE  
To help prevent damage to the engine hood and  
Maintaining the vehicle jack  
·
the windshield wiper arms, lift the wiper arms  
away from the windshield only when they are in  
the service position.  
The vehicle jack requires no regular maintenance. If  
necessary, apply multi-purpose grease to the joints  
of the vehicle jack.  
Always carefully fold the windshield wiper arms  
down against the windshield before driving the  
vehicle.  
·
Windshield wiper blades  
The windshield wiper arms can be moved to  
the service position only when the vehicle is  
not moving.  
Windshield wiper service position  
Cleaning and changing the wind-  
shield wiper blades  
Fig. 153 Windshield wiper in service position.  
In the service position, the wiper arms can be lifted  
away from the windshield → fig. 153. Move the wip-  
ers to the service position as follows:  
Fig. 154 Changing the windshield wiper blades.  
— Switch the ignition off, turn it on briefly, and then  
off again.  
— Press the windshield wiper lever down briefly  
when the ignition is off.  
— Wipers move into service position.  
228  
Do it yourself