of the guides on the sides of the luggage com-
partment.
Variable luggage compart-
ment floor
— Insert the luggage compartment floor into the
guides at the required height and push it forward
as far as it will go.
Removing the luggage compartment floor
— Grasp the recessed handle → fig. 142, lift the lug-
gage compartment floor, and pull it rearward out
of the guides on the sides of the luggage com-
partment.
— Remove the luggage compartment floor and store
it in a clean, dry location.
WARNING
During hard braking or an accident, loose objects
can fly through the passenger compartment and
cause serious or even fatal injuries.
Fig. 142 In the luggage compartment: Opening the
variable luggage compartment floor.
Even if the luggage compartment floor panel is
·
properly raised, it is still necessary to secure all
objects.
NOTICE
Do not let the luggage compartment floor fall freely
when closing it. Always guide it down into place. The
trim or the luggage compartment floor could be
damaged.
If you store the luggage compartment cover
under the variable luggage compartment
floor, insert the luggage compartment floor into the
upper guides.
Fig. 143 In the luggage compartment: Variable lug-
gage compartment floor folded up.
Some models are equipped with a variable luggage
compartment floor, which is height-adjustable.
Opening and closing the luggage compartment floor
— To open: Lift the recessed handle → fig. 142 and
guide the floor upward until it is held in position
by the stops on either side of the luggage com-
— To close: Guide the luggage compartment floor
past the stops and downward into position. If
floor pass through →
.
Adjusting the height of the luggage compartment
floor
— Grasp the recessed handle → fig. 142, lift the lug-
gage compartment floor, and pull it rearward out
Variable luggage compartment floor
215
