Volkswagen Information System -> Using the instrument cluster menus for Your Volkswagen Golf 4 Door 2023

Service event  
For a scheduled oil service or a scheduled inspection  
there is an audible chime when the ignition is  
switched on. The wrench symbol  
Using the instrument cluster  
menus  
also appears for  
several seconds in the instrument cluster display  
along with one of the following messages → fig. 14:  
Introduction  
The number of menus and information in the instru-  
ment cluster display depends on the electronics and  
equipment on the vehicle.  
Oil service now!  
Inspection now!  
Oil service and inspection now!  
An authorized Volkswagen dealer or an authorized  
Volkswagen Service Facility may be able to add or  
modify functions depending on your vehicle's equip-  
ment.  
Viewing service message  
You can view service information → fig. 15 in the Ve-  
hicle settings menu in the Infotainment system  
→ page 26, Infotainment system operation and dis-  
plays.  
As long as a priority 1 warning message is displayed,  
no menus can be accessed. To display menus, ac-  
The current service message can also be accessed in  
the instrument cluster display when the ignition is  
switched on and the vehicle is stopped:  
knowledge the warning by pressing the  
button  
on the multi-function steering wheel → fig. 16.  
WARNING  
— Press and hold the  
cluster → page 15 until the word Service appears in  
the display.  
button in the instrument  
tion of the driver at all times. Driver distraction  
causes accidents, collisions and serious personal  
injury!  
— Release the button. The current service message  
appears in the display for a few seconds.  
Never access menus when the vehicle is mov-  
ing.  
·
Resetting the service reminder display  
If the service was not performed by an authorized  
Volkswagen dealer or an authorized Volkswagen  
Service Facility, the service reminder can be reset as  
follows:  
Emergency starting and starting the engine  
with a very weak vehicle battery or after the  
vehicle battery has been replaced may change or de-  
lete system settings (including time, date, and pro-  
gramming). Check the settings and correct as neces-  
sary once the vehicle battery has built up a sufficient  
charge.  
— Switch off the ignition.  
— Press and hold the  
cluster → page 15.  
button in the instrument  
— Switch on the ignition.  
— Release the  
button.  
— One after the other, the following messages ap-  
pear in the display:  
Reset oil change service?  
Reset inspection interval?  
— When you see the message for the interval you  
want to reset (either oil change or inspection),  
confirm the request by pressing the  
button in  
the instrument cluster. A confirmation message  
appears in the display when the service reminder  
has been reset.  
Do not reset the service reminder between  
service intervals; otherwise, incorrect infor-  
mation will be displayed.  
24  
Volkswagen Information System  
 
button  
Operation with the multi-function  
steering wheel  
— Press the  
rent and previously selected menus.  
button to switch between the cur-  
Please read the introductory information and  
If warning messages are displayed when the  
ignition is switched on, it may not be possible  
to adjust some settings as described, or the informa-  
tion display may appear differently. If this is the  
case, take the vehicle to an authorized Volkswagen  
dealer or an authorized Volkswagen Service Facility  
for assistance.  
heed the Warnings and Notice  
on page 24.  
Driver assistance systems button  
Please read the introductory information and  
heed the Warnings and Notice  
on page 24.  
Fig. 16 Right side of the multi-function steering  
wheel: Controls for the menus and information in the in-  
strument cluster display.  
Accessing the instrument cluster menus and infor-  
mation displays  
— Switch on the ignition.  
— Driver personalization: Select user.  
— If a message or the vehicle icon is displayed, push  
the  
button (→ fig. 16) on the right side of the  
multi-function steering wheel until a main menu  
appears in the instrument cluster display. For  
Fig. 17 On the multi-function steering wheel: Driver  
assistance systems button.  
Your vehicle may have a driver assistance systems  
button on the multi-function steering wheel, which  
lets you switch some driver assistance systems on or  
off in the Assist systems menu → page 18, Instrument  
cluster menus.  
— Push buttons  
menu, and push the arrow up and down buttons  
or  
to move to another main  
and  
to navigate within the current main  
menu.  
To open the menu or information display shown in  
the selection menu, press the button on the mul-  
ti-function steering wheel or wait until the menu or  
information display opens automatically after a few  
seconds.  
Switching individual driver assistance systems on or  
off  
Press the button → fig. 17 A to open the Assist sys-  
tems menu.  
Selecting a setting  
or  
on  
Use the arrow up and down buttons  
multi-function steering wheel → fig. 16 to navigate  
through the available options. A frame may appear  
around the selected option. Push the  
select a setting.  
or  
on the  
er assistance system (for example, Lane Assist, if  
equipped). A “check mark” indicates if the select-  
ed driver assistance system is switched on.  
button to  
— Confirm the selection by pressing the  
on the multi-function steering wheel.  
button  
Returning to the main menu  
You can also switch driver assistance systems on and  
off in the Vehicle settings menu in the Infotainment sys-  
Press the  
or  
button → fig. 16.  
Using the instrument cluster menus  
25