Get Driver information -> Driving data menu Guide for Volkswagen Tiguan 4 Door 2023

Fig. 26 Engine coolant temperature gauge in the analog instrument cluster.

Cold range. The engine is not at operating temperature yet. Avoid high engine RPMs and heavy engine load when the engine is not at operating temperature.

Normal range.

Warning range. The needle may move into the warning range when engine load is heavy, especially when outside temperatures are high.

If the

warning light ﬂashes, the coolant temperature is too high or the coolant level is too low ⇒ Troubleshooting.

Driving data menu

The driving data menu shows driving and consumption data. Depending on the vehicle equipment, various driving data can be displayed. The displayed driving

data is dependent on the current driving style, the vehicle status, e.g. particle ﬁlter regeneration, and the current driving situation, e.g. city trafﬁc. The driving data is

determined as an average value over sections of different distances and the currently displayed value may therefore differ from the actual average value.

Since start memory

If the trip is interrupted for more than two hours, the memory is erased.

Since refuel memory

Display and memory of the collective driving and consumption data. The memory is erased when the vehicle is refueled.

Extended period memory

The memory collects the driving data up to 19 hours and 59 minutes or 99 hours and 59 minutes driving time or 1999.9 km (miles) or 9999.9 km (miles) distance

driven. If one of these maximum thresholds is met, the memory is erased. The maximum thresholds may vary depending on the version of the instrument cluster.

Volkswagen Digital Cockpit Pro and Analog Instrument Cluster Driving Data Menu

The driving data is available in the context menu of the Volkswagen Digital Cockpit Pro.

Switching Between the Displays in the Volkswagen Digital Cockpit Pro and the Analog Instrument Cluster

Vehicles with multi-function steering wheel:

1. Press the

button on the multi-function steering wheel.

Vehicles without multi-function steering wheel:

1. Press the TRIP rocker switch on the windshield wiper lever.

Switching Between the Memories in the Volkswagen Digital Cockpit Pro and the Analog Instrument Cluster

Vehicles with multi-function steering wheel:

1. Press the

button on the multi-function steering wheel.

Vehicles without multi-function steering wheel:

1. Press the

button on the windshield wiper lever.

Deleting the Driving Data Memories in the Volkswagen Digital Cockpit Pro and the Analog Instrument Cluster

Vehicles with multi-function steering wheel:

1. Select the memory to be erased.

2. Press the

button on the multi-function steering wheel.

Vehicles without multi-function steering wheel:

1. Select the memory to be erased.

2. Press the

button on the windshield wiper lever.

Setting the Speed Warning in the Volkswagen Digital Cockpit Pro and Analog Instrument Cluster

Vehicles with multi-function steering wheel:

1. Select the Warning at --- km/h or Warning at --- mph display.

2. Press the

button on the multi-function steering wheel to save the current speed and to activate the warning.

3. Set the speed on the multi-function steering wheel within approximately ﬁve seconds by pressing the

or wait several seconds.

and

arrow buttons. Then press the

button

The speed will then be saved and the warning will be activated.

4. Press the

button again to deactivate.

The stored speed is erased.

Vehicles without multi-function steering wheel:

1. Select the Warning at --- km/h or Warning at --- mph display.

2. Press the

button on the windshield wiper lever to save the current speed and to activate the warning.

3. Set the desired speed within ﬁve seconds with the TRIP rocker switch on the windshield wiper lever. Then press the

seconds.

button or wait several

The speed will then be saved and the warning will be activated.

4. Press the

button again to deactivate.

The stored speed is erased.

The warning can be set for speeds between 30 km/h (18 mph) and 250 km/h (155 mph).

Depending on the country, a single warning tone sounds at speeds of over approximately 80 km/h (approximately 50 mph), and from approximately 120 km/h

(approximately 75 mph), a continuous warning tone sounds. The

by law and cannot be altered.

indicator light will also be displayed in the instrument cluster display. This warning is required

Volkswagen Digital Cockpit Basic Driving Data Menu

The driving data is available in the secondary display area of the Volkswagen Digital Cockpit Basic.

Selecting the Driving Data Menu in the Volkswagen Digital Cockpit Basic

Vehicles with multi-function steering wheel:

1. Select the right or left secondary display area using the

2. Select your preferred driving data menu using the and

buttons.

arrow buttons.

3. Conﬁrm your selection with the

button.

Vehicles without multi-function steering wheel:

1. To open the secondary displays, press the rocker switch on the windshield wiper lever upward or downward.

2. To scroll through the menus, press the rocker switch upward or downward.

3. Press the

button to conﬁrm the selected driving data menu.

Resetting the Driving Data Menu in the Volkswagen Digital Cockpit Basic

Vehicles with multi-function steering wheel:

1. Press the

button.

2. Select the corresponding driving data menu in the conﬁguration menu using the

An arrow behind the entry in the conﬁguration menu indicates a submenu.

and

arrow buttons.

3. In the submenu, select Reset data and conﬁrm by pressing the

button.

Vehicles without multi-function steering wheel:

1. Press and hold the

button.

Driving Data in the Infotainment system

Driving Data can be displayed in the Infotainment system, in addition to being displayed in the instrument cluster.

Selecting Displays in the Infotainment System

You can select the driving data you would like to display using the vehicle settings in the Infotainment system ⇒ Vehicle settings menu.

Consumption

The average fuel consumption is displayed after approximately 300 m (approx. 984 ft).

Range

This indicates the approximate distance in km (miles) the vehicle can travel under the same driving conditions.

Speed

The average speed is displayed after approximately 100 m (approximately 328 ft).

WARNING

If the driver is distracted while driving, accidents and serious injuries can occur. Operating the Volkswagen Digital Cockpit and Infotainment system can distract

you from trafﬁc.

Always drive attentively and responsibly.

Never operate the instrument cluster while driving.

Only adjust any settings in the instrument cluster or Infotainment system when the vehicle is stationary.

Service

Service menu

Depending on the equipment, settings can be applied in the service menu.

Opening the Service Menu in the Volkswagen Digital Cockpit Pro

1. Select the Range information proﬁle.

2. Press and hold the

button on the multifunction steering wheel for approximately four seconds.

3. Navigate in the menu using the buttons on the multi-function steering wheel.

Opening the Service Menu in the Volkswagen Digital Cockpit Basic

1. Select the Travel time/distance driven secondary display.

2. Press and hold the

3. Use the and

button on the multi-function steering wheel in the same direction for approximately six seconds.

arrow buttons to navigate the menu.

Resetting the service interval display

1. Select Service menu.

2. Follow the instructions in the instrument cluster display.

Resetting the oil change service

1. Select Reset oil change service menu.

2. Follow the instructions in the instrument cluster display.

Resetting the Trip Odometer on the Volkswagen Digital Cockpit Pro

1. Select Reset trip menu.

2. Follow the instructions in the instrument cluster display.

Displaying the engine code

1. Select Engine code menu.

The engine code is shown on the instrument cluster display.

Setting the time

1. Select Time menu.

2. Set the time with the

and

arrow buttons.

Displaying copyright information

1. Select the Copyright menu to access the copyright information.

Service interval display

Displays about service events appear in the instrument cluster display and in the Infotainment system. There are different versions of the instrument cluster and

Infotainment system; therefore, the appearances of the displays may vary.

Service appointments at Volkswagen are divided into oil change services and inspections. The service interval display informs the driver about the next service

appointment which includes an engine oil change and about the next inspection.

The service intervals are speciﬁed for vehicles with the ﬁxed oil change service interval.

Intervals are determined individually on vehicles with the ﬂexible oil change service interval. Oil change services only need to be performed if the vehicle requires it

The speciﬁc operating conditions and the personal driving style are also taken into consideration. The service early warning message is ﬁrst displayed 30 days prio

to the calculated oil change service due date. The displayed remaining distance to be traveled is always rounded to 100 km (miles) and the remaining time is

rounded to whole days.

Service notiﬁcation

If an oil change service or an inspection service is due in the near future, a service notiﬁcation will be displayed when the ignition is switched on.

The speciﬁed mileage or time is the distance or time until the next service can be completed.

Service event

When an oil change service or an inspection service is due, a chime will sound when switching on the ignition and you can then see a wrench symbol

seconds in the instrument cluster display together with one of the following displays:

for a fe

Driver information -> Driving data menu for Your Volkswagen Tiguan 4 Door 2023

Popular Manuals