Get Driver information -> Service Guide for Volkswagen Tiguan 4 Door 2023

Always drive attentively and responsibly.

Never operate the instrument cluster while driving.

Only adjust any settings in the instrument cluster or Infotainment system when the vehicle is stationary.

Service

Service menu

Depending on the equipment, settings can be applied in the service menu.

Opening the Service Menu in the Volkswagen Digital Cockpit Pro

1. Select the Range information proﬁle.

2. Press and hold the

button on the multifunction steering wheel for approximately four seconds.

3. Navigate in the menu using the buttons on the multi-function steering wheel.

Opening the Service Menu in the Volkswagen Digital Cockpit Basic

1. Select the Travel time/distance driven secondary display.

2. Press and hold the

3. Use the and

button on the multi-function steering wheel in the same direction for approximately six seconds.

arrow buttons to navigate the menu.

Resetting the service interval display

1. Select Service menu.

2. Follow the instructions in the instrument cluster display.

Resetting the oil change service

1. Select Reset oil change service menu.

2. Follow the instructions in the instrument cluster display.

Resetting the Trip Odometer on the Volkswagen Digital Cockpit Pro

1. Select Reset trip menu.

2. Follow the instructions in the instrument cluster display.

Displaying the engine code

1. Select Engine code menu.

The engine code is shown on the instrument cluster display.

Setting the time

1. Select Time menu.

2. Set the time with the

and

arrow buttons.

Displaying copyright information

1. Select the Copyright menu to access the copyright information.

Service interval display

Displays about service events appear in the instrument cluster display and in the Infotainment system. There are different versions of the instrument cluster and

Infotainment system; therefore, the appearances of the displays may vary.

Service appointments at Volkswagen are divided into oil change services and inspections. The service interval display informs the driver about the next service

appointment which includes an engine oil change and about the next inspection.

The service intervals are speciﬁed for vehicles with the ﬁxed oil change service interval.

Intervals are determined individually on vehicles with the ﬂexible oil change service interval. Oil change services only need to be performed if the vehicle requires it

The speciﬁc operating conditions and the personal driving style are also taken into consideration. The service early warning message is ﬁrst displayed 30 days prio

to the calculated oil change service due date. The displayed remaining distance to be traveled is always rounded to 100 km (miles) and the remaining time is

rounded to whole days.

Service notiﬁcation

If an oil change service or an inspection service is due in the near future, a service notiﬁcation will be displayed when the ignition is switched on.

The speciﬁed mileage or time is the distance or time until the next service can be completed.

Service event

When an oil change service or an inspection service is due, a chime will sound when switching on the ignition and you can then see a wrench symbol

seconds in the instrument cluster display together with one of the following displays:

for a fe

Inspection now!

Oil change now!

Oil change service and inspection now!

Checking a service due date in the Infotainment system

When the ignition is on, the engine is off, and the vehicle is stationary, the current service due date can be viewed at any time:

Checking the service due date in the Infotainment system:

1. Depending on the vehicle equipment, press the

button or function key and select the Vehicle menu in the Infotainment system.

button or function key.

Or: depending on the vehicle equipment, press the

2. Depending on how your vehicle is equipped, select the Settings menu.

3. Select the Service menu item to display the service information.

Checking a Service Due Date in the Analog Instrument Cluster

1. Press and hold the

button in the instrument cluster until Service appears in the display.

2. Release the

button.

The current service due date is shown in the display.

Checking a Service Due Date in the Volkswagen Digital Cockpit Pro and Basic Versions

When the ignition is on, the engine is off, and the vehicle is stationary, the current service due date can be viewed at any time:

1. Open the service menu ⇒ Service menu.

Resetting the service interval display

If the service interval display was not reset after the oil change service or inspection service, the display can be reset as follows:

Vehicles with analog instrument cluster:

1. Switch the ignition off.

2. Press and hold the

button in the instrument cluster.

3. Switch the ignition back on.

4. Release the

5. Press the

button when one of the following messages appears in the instrument cluster display: Reset oil change service? or Reset inspection service?.

button in the instrument cluster to conﬁrm.

Vehicles with a digital instrument cluster: The service interval display can only be reset through the service menu ⇒ Service menu.

Do not reset the service interval display between service intervals or incorrect information will be displayed.

If the oil change service interval was manually reset, the service interval display then also switches to a ﬁxed service interval, even on vehicles with the ﬂexible oil

change service interval.

The service message automatically disappears after a few seconds when the engine is running or by pressing the

lever or the button on the multi-function steering wheel.

button on the windshield wiper

If the 12 V vehicle battery in a vehicle with the flexible service interval has been disconnected for an extended period, the time for the next oil change service

cannot be calculated. Therefore, the service interval displays may show incorrect calculations. If this is the case, follow the maximum permissible maintenance

intervals.

Time

Setting the time in the Infotainment system

1. Depending on the design, press the

button or function key and open the Vehicle menu.

button or function key.

Or: depending on the vehicle equipment, press the

2. Depending on how your vehicle is equipped, open the Settings menu.

3. Select the Time and date menu item to set the time.

Setting the Time in the Volkswagen Digital Cockpit Pro

1. Select the Range information proﬁle.

2. Press and hold the

button on the multi-function steering wheel until the service menu is available in the instrument cluster display ⇒ Service menu.

3. Select Time menu.

4. Set the correct time using the

arrow buttons.

Setting the Time in the Volkswagen Digital Cockpit Basic

1. Open the service menu ⇒ Service menu.

2. Select the Time menu.

Driver information -> Service for Your Volkswagen Tiguan 4 Door 2023

Popular Manuals