3. Set the correct time with the
button.
Setting the time in the analog instrument cluster
1. To set all clocks in the vehicle, press and hold the
button in the analog instrument cluster until Time appears in the instrument cluster display.
2. Release the
button.
The time is displayed and the hour display is marked.
3. Press the
button as many times as required until the preferred hours are displayed.
Press and hold the
button to move through the numbers faster.
After several seconds, the system automatically switches to minute display.
4. Press the button as many times as required until the desired minutes are displayed.
Press and hold the button to move through the numbers faster.
5. Release the button to finish setting the time.
Vehicle settings menu
You can switch individual functions and
systems on and off and adjust settings
in the vehicle settings menu in the
Infotainment system.
Opening the Vehicle settings Menu
1. Switch the ignition on.
2. If necessary, switch on the Infotainment system.
3. Depending on the equipment, press the
Or: depending on the design, press the
button or function key and select the Vehicle menu.
button or function key and select the Settings menu.
Or: Tap the
function key and select the Car menu.
4. To open other menus in the Vehicle settings menu or to adjust settings to the menu items, tap the
function key and select the relevant function keys.
5. Tap the
function key to return to the previous menu.
A check mark
indicates that the respective function is switched on.
System settings and vehicle information display
Vehicle settings (setup)
Depending on vehicle equipment: Performance monitor.
Depending on vehicle equipment: Lap timer.
Off-road display ⇒ Offroad display.
Volkswagen Digital Cockpit (Pro) ⇒ Volkswagen Digital Cockpit Pro, ⇒ Volkswagen Digital Cockpit Pro Information Displays .
Volkswagen Digital Cockpit (Basic) ⇒ Volkswagen Digital Cockpit Basic, ⇒ Volkswagen Digital Cockpit Basic Information Displays.
Active media.
Driving Data.
Vehicle status.
Radio station selection.
After starting the engine when the 12 V vehicle battery is severely drained or has been replaced or jump-started, system settings, e.g. personal convenience
settings and programming, may be adjusted or deleted. Check and correct the settings after the 12 V vehicle battery is sufficiently recharged.
WARNING
If the driver is distracted, accidents and serious injuries can occur. Operating the Infotainment system can distract you from traffic.
Always drive attentively and responsibly.
Adjust settings in the Infotainment system only when the vehicle is stationary.
Dynamic Road Sign Display
Introduction
The Dynamic Road Sign Display detects
standard road signs using a camera in
the interior rearview mirror base and
informs the driver of detected speed
43
