Wheels and tires -> Maintaining wheels and tires for Your Volkswagen Tiguan 4 Door 2023

Check the tire pressure regularly.  
Rims with bolted rim ring or accent elements  
Rims with a bolted rim ring or accent element consist of multiple pieces. These pieces are connected together with special bolts. Damaged rims must be replaced  
and may only be repaired by an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized  
Volkswagen dealer or authorized Volkswagen Service Facility.  
Rim identification  
In some countries, new rims must include information about certain properties. The following information may be on the rim:  
Seal of conformity  
Rim size  
Manufacturer or brand name  
Production date (month/year)  
Country of origin  
Serial number  
Raw material batch number  
Commodity code  
WARNING  
Using unsuitable or damaged rims can impair driving safety and cause accidents and serious injuries.  
Only use rims permitted for the vehicle.  
Check the rims regularly for damage and replace them if necessary.  
WARNING  
Loosening and tightening bolts incorrectly on rims with bolted rim rings can cause severe accidents and death.  
Never loosen the bolts on rims with a bolted rim ring.  
Have all procedures on rims with bolted rim rings performed by an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Maintaining wheels and tires  
Checking the tire pressure  
Check the tire pressure at least once a month.  
Check the tire pressure only when tires are cold. The specified tire pressure only applies to a cold tire. The tire pressure on warm tires is higher than on cold  
tires. Therefore, never release air from a warm tire to adjust the tire pressure.  
Always adjust the tire pressures to the vehicle load   
.
After adjusting tire pressures, always screw the caps on the valves and note the information about the Tire Pressure Monitoring System (TPMS).  
Always use the tire pressures specified on the label. Never exceed the maximum tire pressure specified on the side of the tire.  
Fig. 210 On the driver door pillar: Tire inflation pressure label.  
The correct tire pressure for the tires fitted at the factory can be found on a label on the B-pillar of the driver door fig. 210. The factory-installed tires can be winter  
summer or all-season tires.  
347  
 
An incorrect tire pressure can cause increased tire wear, negatively affect driving behavior and damage tires. Compliance with the correct tire pressure is very  
important, particularly when driving at high speeds.  
The specified tire pressure is given for a cold tire. For warm tires, the pressure is higher.  
Never reduce the pressure of a warm tire in order to reach the specified value. This will cause the actual pressure when the tire is cold to be too low.  
WARNING  
A tire pressure that is too low can result in a sudden loss of air, separation of the tire tread or bursting of the tire while driving. An incorrect tire pressure shortens  
the service life of the tire and negatively affects driving behavior.  
An incorrect tire pressure can cause accidents and fatal injuries.  
Check the tire pressures regularly, at least once a month and also before driving long distances.  
Always adjust the tire pressure according to your load.  
Never reduce the tire pressure when tires are warm.  
WARNING  
Excessive speeds and vehicle overloading can cause overheating, sudden tire damage (including tire blow-outs) and separation of the tread.  
This can cause accidents and fatal injuries.  
Never exceed the maximum load for the tires fitted Tire labeling and tire classifications.  
Never exceed the maximum permitted speed for the tires fitted Tire labeling and tire classifications.  
NOTICE  
Careless handling of the tire pressure gage may damage the valve.  
When positioning the tire pressure gauge, make sure it is not tilted at the valve stem.  
Tire pressures that are too low increase fuel consumption.  
Tire inflation pressure for cold tires  
Tire pressure  
Model  
Size designation  
psi  
38  
36  
38  
38  
44  
41  
39  
41  
41  
46  
60  
kPA  
260  
250  
260  
260  
300  
280  
270  
280  
280  
320  
420  
bar  
2.6  
2.5  
2.6  
2.6  
3.0  
2.8  
2.7  
2.8  
2.8  
3.2  
4.2  
215/65 R17 99H  
235/55 R18 100H  
235/50 R19 99H  
255/45 R19 100H  
255/40 R20 101H XL  
215/65 R17 99H  
235/55 R18 100H  
235/50 R19 99H  
255/45 R19 100H  
255/40 R20 101H XL  
T145/85 R18  
Tiguan FWD  
Tiguan all-wheel drive  
(4MOTION)  
Spare wheel  
Details of the correct tire pressure are located on the tire pressure label on the driver's door pillar. If the details on the tire pressure label differ from the details in the  
Manual, the details on the tire pressure label apply.  
Monitoring the tightening torque  
The correct wheel bolts must always be used for each vehicle model, and these bolts must always be tightened to the correct torque. The wheel bolt tightening  
torque must be checked regularly with a functional torque wrench. In addition, the tightening torque must be checked immediately after each wheel change with a  
348  
 
functional torque wrench. If the wheel bolts are not tightened enough to meet the specification, the wheel bolts and rims could come loose while driving. Exceeding  
the tightening specification could damage the wheel bolts and threads.  
Wheel bolts that are corroded and difficult to turn must be replaced and the threads in the wheel hub must be cleaned before checking the tightening torque. Never  
grease or oil the wheel bolts and the threads in the wheel hub.  
Wheel bolt tightening specification  
The tightening torque of the wheel bolts is specified in the chapter on replacing wheels page , Changing a wheel.  
WARNING  
If the wheel bolts are not tightened enough to meet the specification, the wheel bolts and consequently the wheel could come loose while driving. Exceeding the  
tightening specification could damage the wheel bolts and threads.  
Wheel bolts that are tightened incorrectly or missing could cause you to lose control of the vehicle and lead to serious accidents and fatal injuries.  
Always tighten the wheel bolts to the correct tightening torque. If you do not have a torque wrench, tighten the wheel bolts with the lug wrench and then  
have the tightening torque checked as soon as possible by an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Never drive with missing or loose wheel bolts.  
Always use wheel bolts that are correct for the rim and the vehicle model.  
Never grease or oil the wheel bolts and the threads in the wheel hub. Even when tightened to the specification, the wheel bolts could become loose while  
driving.  
Ensure the wheel bolts and threads in the wheel hubs are clean, easy to move and free of oil and grease.  
Never loosen the bolts on rims with a bolted rim ring.  
Replacing tires  
Fig. 211 General example: Diagram for rotating the wheels.  
To ensure that the tires wear evenly, rotating the tires regularly according to the diagram is recommended fig. 211. This will allow the tires to have approximately t  
same length of service life.  
Volkswagen recommends having the wheel replacement carried out by an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Monitoring the tread depth  
Tread depth  
Most driving situations require a tire tread that is as deep as possible. All tires, or at least tires on the same axle, must have an even tread depth  
in particular to wet or wintry road conditions.  
. This app  
In most countries, the legal minimum tread depth is 1.6 mm (1/16 of an inch). This is measured in the tread grooves next to the wear indicators. Observe any legal  
regulations specific to the country where you are driving.  
Note the legal requirements in the applicable country for minimum tread depths on winter and all-season tires.  
Tire wear  
349  
 
Tire wear depends on various factors:  
Driving style.  
Wheel balancing.  
Running gear alignment.  
An imbalance can occur while driving, which can be noticed by uneven steering. Tire imbalances also affect tire wear. In these situations, have the wheels balanced  
again.  
Incorrect wheel alignment impairs driving safety and increases tire wear. If there is high degree of tire wear, have the wheel alignment checked by an authorized  
Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen  
Service Facility.  
Tire Wear when Driving with a Sporty Driving Style  
Driving quickly around curves, rapid acceleration, and heavy braking increase tire wear.  
If you drive with a sporty driving style, check the tread depth every 5000 to 10,000 km (approx. 3107 to 6214 miles).  
Tread wear indicator in tires  
Fig. 212 Tire tread: tread wear indicator.  
The tread wear indicator is 1.6 mm (1/16 in) above the base of the tread fig. 212. Markings on the sides of the tire indicate the location of the tread wear indicator  
The tread wear indicator indicates if a tire is worn out. At the latest, the tire must be replaced if the tread depth is worn down to the tread wear indicator.  
When you check the tread depth, you must check the wear indicators of all tread grooves  
WARNING  
Worn tires are a safety risk and make it difficult to control the vehicle well. They increase the braking distance and the risk of skidding.  
Worn tires have significantly less grip. Particularly on wet roads, the vehicle is more likely to “hydroplane”.  
Worn tires could cause loss of vehicle control, serious accidents and death.  
Replace tires with new tires when the tires are worn down to the tread wear indicator.  
Wheels and tires in snow and ice  
Winter tires  
Summer tires offer very little holding force on icy or snowy roads. Winter or all-season tires improve vehicle handling and braking performance in winter road  
conditions. Volkswagen recommends using winter tires on the vehicle at temperatures below +7 °C (+45 °F) or in winter road conditions. This also applies to  
vehicles with all-wheel drive (4MOTION).  
The effectiveness of winter or all-season tires is greatly reduced when the tire tread is worn down to a depth of 3/16 in (4 mm).  
The following applies when using winter tires:  
Follow all applicable laws in the country of operation.  
Use winter tires on all four wheels at the same time.  
Only use in winter road conditions.  
Only use the tire sizes permitted for the vehicle.  
350